Brake depth maintenance prevents common faults in the brake system

Release date:2016-07-27 Author:From the network Click:

Good braking system is the protection of life, the horse horsepower how much can open more than not the most important, can put the car can be a good car.

The key moment, the safety and danger of the distance may be only 2 meters, 1 meter or 0.5 meters ..., in order to make the vehicle brake system for a long time in the best condition to ensure that the brake is accurate and safe, you need to regularly do your car brake depth maintenance.

Brake system common symptoms:

1, the brake disc surface dirt too much, will cause the brake is not sensitive.

2, brake cylinder guide pin stuck, resulting in four-wheel brake is not balanced,

3, both ends of the brake pads lose lubrication, resulting in abnormal sound when the brake.

4, the wheel "sintering" and killed, the rim can not be removed, the screws rust, strong broken fracture.

Brake depth maintenance can effectively prevent the brake system common faults, the specific can be divided into the following four steps:

1, oil cleaning: brake disc cleaning agent can quickly clean the brake disc (drum), brake pads and brake calipers, and tire oil, dust; volatile fast, no residue after drying, non-corrosive ingredients.

2, pump lubrication: Before using the brake pump lubricant carefully clean the pump parts, the pump lubricant evenly applied to the pump connection shaft, which can effectively keep the pump bushing soft to prevent corrosion and extend the life of the pump.

3, high temperature protection: the process of braking caused by high temperature is likely to cause damage to the brake parts heat, high temperature protection agent can be targeted to prevent damage to the braking system, high temperature 1400 ℃, the high temperature protection agent applied to the back of the brake pads, Long lasting lubrication characteristics, to prevent the brakes were killed, easy to dismantle.

4, dismantling freely: off the package is high pressure, high adhesion lubricant, the temperature of -80 ℃ to 1100 ℃, in the brake system for cleaning, sub-pump lubrication, high temperature protection, the anti- In the shaft position, there is a good lubrication performance, anti-sintering, to achieve dismantling freely.

After the brake system is assembled, the tires will be fitted with the depth of the brakes. Brake depth maintenance will provide you with unlimited driving pleasure and driving support. Recommended every 20000 km to do a brake depth maintenance.


Article URL:http://xszjj.com/en/news/234.html

Related labels:Caroutlet

Recent browse:

leave a message for us
Enter message content
name
name
tel
phone number
email
email
address
address